Fibras huecas de poliéster antimicrobianas.
Fibras huecas de poliéster antimicrobianas.
Fibras huecas de poliéster antimicrobianas.
Fibras huecas de poliéster antimicrobianas.

Hollow Conjugate Polyester Staple Fiber for Stuffing, Filling Pillows and Nonwoven

Highly elastic with good raw white

Super soft hand feeling with silicon

Less flaw and better warmth character

Mainly used for filling material, non-woven fabric, polyester wadding ,polyester cotton, silk-like cotton,needle-punched cotton and so on.



Hollow Conjugate Siliconized Polyester 

Model NO.Hollow Conjugate Siliconized Polyester
Width51mm/64mm /32mm /38mm /76mm
GradeVirgin/ Recycled
ShapeHollow Conjugated
Transport Packageby Ocean
Specification3d /2.8d/ 6d /7d/ 10d/12d /15d/ 20d/24d/27d/30d et
OriginViet Nam, China
HS Code55032000
Production Capacity50000 tons
Product Description

Product Description

Fineness0.9D ~ 25D
Fiber length25/32/28/38/51/64/76/108MM
materialChips or Pet Flakes
patternSilicon or Non-silicon
colorOB or RW
delivery time3 days after getting original lc or T/T advanced prepayment
paymentL/C OR T/T
loading portAny port in Viet Nam or China
packageNon-woven Bags
MOQ1 x40ft HC


Specification sheet for 1.2D
No.Inspection ItemUnitStandardMeasure ValueResult
4Length Tolerance%±10+3Passed
6Doubles long fiber contentmg/100g≤2000Passed
7Flaw contentmg/100g≤1000362.7Passed


Specification sheet for 1.4D
No.Inspection ItemUnitStandardMeasure ValueResult
4Length Tolerance%±10+1Passed
6Doubles long fiber contentmg/100g≤2000Passed
7Flaw contentmg/100g≤1000352.4Passed


Specification sheet for 3D
No.Inspection ItemUnitStandardMeasure ValueResult
4Length Tolerance%±100.4Passed
6Doubles long fiber contentmg/100g≤2000Passed
7Flaw contentmg/100g≤1000169Passed


Specification sheet for 6D
No.Inspection ItemUnitStandardMeasure ValueResult
4Length Tolerance%±10+10Passed
6Multiple Length Fibermg/100g≤2001Passed
7Defect Contentmg/100g≤1000344Passed
8bulking intensity V1cm3/g≥140172Passed
9bulking intensity V2cm3/g≥3562Passed
10bulking intensity V3cm3/g≥140150Passed
11rebound degree%≥7072Passed
12Hollow rate%≥1212Passed


Specification sheet for 7D
No.Inspection ItemUnitStandardMeasure ValueResult
4Length Tolerance%±10+9Passed
6Multiple Length Fibermg/100g≤20029Passed
7Defect Contentmg/100g≤1000480Passed
8bulking intensity V1cm3/g≥140190Passed
9bulking intensity V2cm3/g≥3576Passed
10bulking intensity V3cm3/g≥140156Passed
11rebound degree%≥7076Passed
12Hollow rate%≥1214Passed

Technical Parameter

Usually used as padding/filling material of cushions, bedding, sofas, etc.
size(denier):3D 7D 15D 30D
length(mm):28mm -152mm
Category: Chemical Fiber
Usage: Garment, Industrial, Home Textile, Army, Bag, Shoes, Tent and Awning
Grade: Recycled
Transport Package: PP Bales
Fiber Type: Staple
Material: Pet
Feature: Heat-Resistant, Anti-Static, Anti-Distortion, Flame Retardant, Abrasion-Resistant, Anti-Pilling
Shape: Rayon

About Us:

We are a leading supplier of polyester staple fiber based in Viet Nam. With a strong presence in both the domestic and international markets, we can supply various types of PSF, both recycled and virgin grades.

Our product offerings include a range of hollow conjugated polyester staple fiber (white, brown, green), as well as solid, conjugate, and siliconized fibers ranging from 3D to 15D. We also have microfiber, with sizes ranging from 0.9D to 1.4D and cut lengths from 25mm to 32mm. Our fibers are primarily utilized in the production of non-woven fabrics and spinning yarns, and are in high demand in European and South American markets.

We adhere to international quality standards and pride ourselves on delivering products that are well-received across various global markets. Our state-of-the-art facilities and stringent quality control measures ensure that we consistently meet and exceed customer expectations.

If you are interested in knowing more about our products, please do not hesitate to reach out to us. We welcome the opportunity to establish mutually beneficial partnerships with new clients worldwide. Thank you for considering us.

Staple fiber production process

The base material, which comes in chips, is melted in an extruder before being quantified in a gear pump and transferred to a nozzle. Polymers that pass through the nozzle are cooled and solidified in a spinning tank, and end up in a fiber form (semi-finished product). Fiber released from multiple spinning tanks is lubricated and gathered before being wound by a gear wheel and placed in cans. Fiber placed in cans is given various properties through a stretching process, in which fiber is stretched at various roller speeds designed to endow different degrees of rigidity and elasticity.

The fiber is again lubricated for enhanced quality and to facilitate the processes that follow. A crimping process takes place to give the fiber various properties, including bulk and mixability. Moisture and lubricant on the fiber is dried off in a heat dryer. The fiber is then cut into required lengths and end up in a bale form. The fiber is then compressed, packaged, and stored for factory release when ordered.


PSF Manufacturers
Fiber Fill Production



1. What do you offer?

We produce recycled hollow conjugated siliconized and non-siliconized polyester staple fiber mainly, we can make hollow fiber (HS/ HD) and virgin polyester staple fiber HCS as well.

2. What is it used for?

Our fiber is widely used in filling, non-woven fabric

3. Are you a factory or a trading company?

We are a factory specialized in polyester staple fiber for many years but now we also have our own professional trading company. We will source many types of textile products such as yarn, PP fibers from others to supply our own customers as well. We also provide our own customers with other related products such as: Foam, Pillows, Cushions, Toys, Down/ Feather,…

4. Where is your factory location?

Our factory locates in the north and the south of Vietnam. You can visit us from Ho Chi Minh City and Hanoi City, Vietnam. You could contact our salesman to fetch you if visiting.

5. Can you accept free sample?

Yes, the hand sample is free when not exceed 1 kilograms. Upon price confirmation, we will provide a sample within 2-3 days; the freight cost will be charged to client.

6. Can you provide ODM service?

Yes, we work on ODM orders. Which means size, material, quantity, design, packing solution, etc, will depend on your requests, and your logo will be customized on our products.

7. How about your quality? What’s the minimum order Quantity (MOQ)?

Please try a trial order, you will know it. The MOQ is 23,000 Kilograms/order, but the price will be lower if you order bulk volume.

8. Can I mix different items in one order?

Sure, you can mix any products we can provide.

9. How can you guarantee the product quality?

We have experienced QC team. We control not only productive process but also raw material. In addition, we have different kinds of testing instrument to help us guarantee the product quality.

10. What’s the payment terms?

L/C at sight, 30% TT in advance are mostly accepted; other terms shall be negotiable by both sides

If you need further information,please feel free to contact me.
Beside raw material, I also offer home textile machinery or virgin polyester staple fiber sourced from my long term partners to offer one stop solution services for our clients.
I am looking forward to hearing from you!.
Thanks and Best Regards,
Tony Tan
Whatsapp number: +84 90 466 5251
Wechat: tony_tan8899